New Products

Introducing the Profilux 3, this system is capable of the following functions (with the necessary hardware fitted)
Measurement & control of pH-value, temperature, Redox, conductivity (salt or fresh water), oxygen, humidity, air temperature, all sensors are galvanically isolated.
Seasonal temperature courses.
Automatic calibration of all sensors.
Auto top off, automatic water change, leakage detection.
Illumination control for dimmable (1-10V-interfaces or DALI) and non-dimmable lamps, calendar-based moon phases, storms, also seasonally variable illumination possible including thunderstorm simulations using the GHL LED sticks and spots.
AC dimmable ballast controllable
Aqua Illumination compatible unlocking the true capabilities of the aqua illumination system.
TMC Aqua Ray controllable.
8 x Tunze stream controllable with the addition of simple cable kit, no Tunze controller required. FURTHER STREAMS ARE CONTROLLABLE WITH EXPANSION. Tunze wave box controllable.
Hydor Koralia 12v controllable using pump control-1 expansion box.
Pump control for controllable and non-controllable pumps (see above), different pump groups with different settings, waves, ebb-flow, surge, random, sequences, shortest wave duration 0,4 s, therefore also suited for wave boxes .
Dosing pump control, GHL dosing pump systems.
Universal timers, shortest switching time 1s.
Integrated web-server (display of values and configuration, remote programming), own website can be loaded, compatible with all current browsers.
Integrated e-mail-client (sending of e-mails in case of an alarm).
PIN-protection.
Reminder functions.
Optical and acoustic alarm.
Feeding pause and maintenance function.
Safety functions, e.g. redundant sensors, monitoring of the sensor function, value check.
Due to simple software updates (device doesn’t need to be opened for this), always the newest functions are available.
Large internal storage for measured values for all sensors, according to the setting, you can store measured values up to several years.
Switch-on delay of sockets after blackout.
Programmable logic.
PC-software available for FREE.
100%-downwardly compatible: hardware of ProfiLux Plus II can be used further on (e.g. expansion cards, powerbars, ProfiLux View II).
ProfiLux Plus II can be upgraded to ProfiLux 3, ProfiLux Plus II (eX) can be upgraded to ProfiLux 3 (eX) with an Upgrade-Kit.
Connection of external display and operating units (ProfiLux View-PAB) possible, also several to one system.
Internal clock keeps on running also during a blackout (Goldcap instead of battery, therefore no battery change necessary).
All settings remain also during blackout.
Universal analog (0 – 10 V) and digital inputs.
Hardware ProfiLux 3 (eX)
32Bit-controller – enough reserve of processing power and storage for future extensions
Inputs for pH-value, temperature, 2 x level (ProfiLux 3 eX has additional inputs for redox, conductivity and one more level sensor).
2x expansion slots. Infinite further expansion with the PAB expansion box
4x 1-10V-interfaces with additional shut-off signals, dimmable electronic ballasts can be turned completely powerless at 0% (6x for ProfiLux 3 eX ).
2x connections for ProfiLux II-powerbars.
LAN (WLAN compatible: if a wireless bridge is used, a wireless connection is possible).
USB.
2x ProfiLux Aquatic Bus (PAB)-Interface.
RS232-port, to connect a SMS-Module or a ProfiLux View, also suited for the connection to PCs, multimedia controller or house automation systems with RS232.
Graphical blue/white display.
Robust key pad.
Hardware Powerbar-PAB
6x separately switchable sockets each can be loaded with 15 AMP with infinate expandability of socket numbers.
Current measurement for all sockets.
Safety switches in case of a failure of ProfiLux or PAB ? sockets then overtake a preprogrammed state (on or off).
Hardware Expansion Box-PAB
Inputs for pH-value, temperature, conductivity, Redox, 2 x level.
5x expansion slots.
4x 1-10V-interfaces (6x for ProfiLux 3 eX ).

This starter kit consists of:
Starter Pack includes:

* ProfiLux 3 EX base unit
* PC connection cable - Software downloadable free from the GHL site
* 6 way PAB digital plug bar
* GHL PH electrode
* Temperature sensor
* pH 7.00 and 9.00 Calibration solutions

Please note the PAB powerbars are not supplied with a PAB cable, this must be ordered separately in the length required.

Introducing the new Profilux 3, this system is capable of the following functions (with the necessary hardware fitted)
Measurement & control of pH-value, temperature, Redox, conductivity (salt or fresh water), oxygen, humidity, air temperature, all sensors are galvanically isolated.
Seasonal temperature courses.
Automatic calibration of all sensors.
Auto top off, automatic water change, leakage detection.
Illumination control for dimmable (1-10V-interfaces or DALI) and non-dimmable lamps, calendar-based moon phases, storms, also seasonally variable illumination possible including thunderstorm simulations using the GHL LED sticks and spots.
AC dimmable ballast controllable
Aqua Illumination compatible unlocking the true capabilities of the aqua illumination system.
TMC Aqua Ray controllable.
8 x Tunze stream controllable with the addition of simple cable kit, no Tunze controller required. FURTHER STREAMS ARE CONTROLLABLE WITH EXPANSION. Tunze wave box controllable.
Hydor Koralia 12v controllable using pump control-1 expansion box.
Pump control for controllable and non-controllable pumps (see above), different pump groups with different settings, waves, ebb-flow, surge, random, sequences, shortest wave duration 0,4 s, therefore also suited for wave boxes .
Dosing pump control, GHL dosing pump systems.
Universal timers, shortest switching time 1s.
Integrated web-server (display of values and configuration, remote programming), own website can be loaded, compatible with all current browsers.
Integrated e-mail-client (sending of e-mails in case of an alarm).
PIN-protection.
Reminder functions.
Optical and acoustic alarm.
Feeding pause and maintenance function.
Safety functions, e.g. redundant sensors, monitoring of the sensor function, value check.
Due to simple software updates (device doesn’t need to be opened for this), always the newest functions are available.
Large internal storage for measured values for all sensors, according to the setting, you can store measured values up to several years.
Switch-on delay of sockets after blackout.
Programmable logic.
PC-software available for FREE.
100%-downwardly compatible: hardware of ProfiLux Plus II can be used further on (e.g. expansion cards, powerbars, ProfiLux View II).
ProfiLux Plus II can be upgraded to ProfiLux 3, ProfiLux Plus II (eX) can be upgraded to ProfiLux 3 (eX) with an Upgrade-Kit.
Connection of external display and operating units (ProfiLux View-PAB) possible, also several to one system.
Internal clock keeps on running also during a blackout (Goldcap instead of battery, therefore no battery change necessary).
All settings remain also during blackout.
Universal analog (0 – 10 V) and digital inputs.
Hardware ProfiLux 3 (eX)
32Bit-controller – enough reserve of processing power and storage for future extensions
Inputs for pH-value, temperature, 2 x level (ProfiLux 3 eX has additional inputs for redox, conductivity and one more level sensor).
2x expansion slots. Infinite further expansion with the PAB expansion box
4x 1-10V-interfaces with additional shut-off signals, dimmable electronic ballasts can be turned completely powerless at 0% (6x for ProfiLux 3 eX ).
2x connections for ProfiLux II-powerbars.
LAN (WLAN compatible: if a wireless bridge is used, a wireless connection is possible).
USB.
2x ProfiLux Aquatic Bus (PAB)-Interface.
RS232-port, to connect a SMS-Module or a ProfiLux View, also suited for the connection to PCs, multimedia controller or house automation systems with RS232.
Graphical blue/white display.
Robust key pad.
Hardware Powerbar-PAB
6x separately switchable sockets each can be loaded with 15 AMP with infinate expandability of socket numbers.
Current measurement for all sockets.
Safety switches in case of a failure of ProfiLux or PAB ? sockets then overtake a preprogrammed state (on or off).
Hardware Expansion Box-PAB
Inputs for pH-value, temperature, conductivity, Redox, 2 x level.
5x expansion slots.
4x 1-10V-interfaces (6x for ProfiLux 3 eX ).

This starter kit consists of:
Starter Pack includes:

* ProfiLux 3 EX base unit
* PC connection cable - Software downloadable free from the GHL site
* 6 way digital plug bar
* GHL PH electrode
* Temperature sensor
* pH 7.00 and 9.00 Calibration solutions

Introducing the new Profilux 3, this system is capable of the following functions (with the necessary hardware fitted)
Measurement & control of pH-value, temperature, Redox, conductivity (salt or fresh water), oxygen, humidity, air temperature, all sensors are galvanically isolated.
Seasonal temperature courses.
Automatic calibration of all sensors.
Auto top off, automatic water change, leakage detection.
Illumination control for dimmable (1-10V-interfaces or DALI) and non-dimmable lamps, calendar-based moon phases, storms, also seasonally variable illumination possible including thunderstorm simulations using the GHL LED sticks and spots.
AC dimmable ballast controllable
Aqua Illumination compatible unlocking the true capabilities of the aqua illumination system.
TMC Aqua Ray controllable.
8 x Tunze stream controllable with the addition of simple cable kit, no Tunze controller required. FURTHER STREAMS ARE CONTROLLABLE WITH EXPANSION. Tunze wave box controllable.
Hydor Koralia 12v controllable using pump control-1 expansion box.
Pump control for controllable and non-controllable pumps (see above), different pump groups with different settings, waves, ebb-flow, surge, random, sequences, shortest wave duration 0,4 s, therefore also suited for wave boxes .
Dosing pump control, GHL dosing pump systems.
Universal timers, shortest switching time 1s.
Integrated web-server (display of values and configuration, remote programming), own website can be loaded, compatible with all current browsers.
Integrated e-mail-client (sending of e-mails in case of an alarm).
PIN-protection.
Reminder functions.
Optical and acoustic alarm.
Feeding pause and maintenance function.
Safety functions, e.g. redundant sensors, monitoring of the sensor function, value check.
Due to simple software updates (device doesn’t need to be opened for this), always the newest functions are available.
Large internal storage for measured values for all sensors, according to the setting, you can store measured values up to several years.
Switch-on delay of sockets after blackout.
Programmable logic.
PC-software available for FREE.
100%-downwardly compatible: hardware of ProfiLux Plus II can be used further on (e.g. expansion cards, powerbars, ProfiLux View II).
ProfiLux Plus II can be upgraded to ProfiLux 3, ProfiLux Plus II (eX) can be upgraded to ProfiLux 3 (eX) with an Upgrade-Kit.
Connection of external display and operating units (ProfiLux View-PAB) possible, also several to one system.
Internal clock keeps on running also during a blackout (Goldcap instead of battery, therefore no battery change necessary).
All settings remain also during blackout.
Universal analog (0 – 10 V) and digital inputs.
Hardware ProfiLux 3 (eX)
32Bit-controller – enough reserve of processing power and storage for future extensions
Inputs for pH-value, temperature, 2 x level (ProfiLux 3 eX has additional inputs for redox, conductivity and one more level sensor).
2x expansion slots. Infinite further expansion with the PAB expansion box
4x 1-10V-interfaces with additional shut-off signals, dimmable electronic ballasts can be turned completely powerless at 0% (6x for ProfiLux 3 eX ).
2x connections for ProfiLux II-powerbars.
LAN (WLAN compatible: if a wireless bridge is used, a wireless connection is possible).
USB.
2x ProfiLux Aquatic Bus (PAB)-Interface.
RS232-port, to connect a SMS-Module or a ProfiLux View, also suited for the connection to PCs, multimedia controller or house automation systems with RS232.
Graphical blue/white display.
Robust key pad.
Hardware Powerbar-PAB
6x separately switchable sockets each can be loaded with 15 AMP with infinate expandability of socket numbers.
Current measurement for all sockets.
Safety switches in case of a failure of ProfiLux or PAB ? sockets then overtake a preprogrammed state (on or off).
Hardware Expansion Box-PAB
Inputs for pH-value, temperature, conductivity, Redox, 2 x level.
5x expansion slots.
4x 1-10V-interfaces (6x for ProfiLux 3 eX ).

This starter kit consists of:
Starter Pack includes:

* ProfiLux 3 base unit
* PC connection cable - Software downloadable free from the GHL site
* 6 way digital plug bar
* GHL PH electrode
* Temperature sensor
* pH 7.00 and 9.00 Calibration solutions

EVG-2D-80-T5-DALI - Dimming Dali Ballast 2x80w T5

For the connection of 1 or 2 dimmable ballasts to the Profilux Plus II computer where there is a high current draw, for example with 80w ballasts.

For the connection of 1 dimmable ballasts to the Profilux Plus II computer

This is a 2-channel pump controller for 12V-pumps. The package includes a cable set for connecting 2 pumps Koralia Nano or Koralia 1 - 4 directly.
This pump controller will be connected to the ProfiLux and occupies 2 1-10V-Channels.
Now it is possible to control the well priced high quality pumps from Koralia with the multitude of current/wave programmes from the ProfiLux!
Using 2 x PumpControl1 you are able to control 4 pumps independently - great effects like surge, random waves (and everything else ProfiLux is able to do) can be produced easily.

Replacement Dosing pump tubing, fits the dosing heads on the standard and independant dosers.